NUC6i5SYH に Centos7.1をInstallしてIntel 11ac(AC8260)を動作確認

[root@centos7 ~]# cat /etc/redhat-release
CentOS Linux release 7.1.1503 (Core)
[root@centos7 ~]# cd /usr/local/src
[root@centos7 src]# git clone https://github.com/OpenELEC/iwlwifi-firmware
Cloning into ‘iwlwifi-firmware’…
remote: Counting objects: 143, done.
remote: Total 143 (delta 0), reused 0 (delta 0), pack-reused 143
Receiving objects: 100% (143/143), 25.40 MiB | 5.60 MiB/s, done.
Resolving deltas: 100% (92/92), done.
[root@centos7 src]# ls
iwlwifi-firmware
[root@centos7 src]# cd iwlwifi-firmware
[root@centos7 iwlwifi-firmware]# ls
GPL-3 README create_tar.sh firmware install
[root@centos7 iwlwifi-firmware]# cd firmware
[root@centos7 firmware]# cp iwlwifi-8000C-*.ucode /lib/firmware
[root@centos7 firmware]# shutdown -r now

[root@centos7 firmware]# nmcli d
デバイス タイプ 状態 接続
eth0 ethernet 接続済み eth0
lo loopback 管理無し —
wlan0 wifi 管理無し —
[root@centos7 ~]# yum install NetworkManager-wifi
[root@centos7 ~]# shutdown -r now

[root@centos7 ~]# nmcli d
デバイス タイプ 状態 接続
eth0 ethernet 接続済み eth0
wlan0 wifi 切断済み —
lo loopback 管理無し —
[root@centos7 ~]# nmcli d wifi connect ssid password ********** ここで接続
Device ‘wlan0’ successfully activated with ********-****-****-****-************.
[root@centos7 ~]# nmcli d
デバイス タイプ 状態 接続
eth0 ethernet 接続済み eth0
wlan0 wifi 接続済み ssid
lo loopback 管理無し —
[root@centos7 ~]# ifconfig wlan0
wlan0: flags=4163 mtu 1500
inet 192.168.1.248 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::2c2:c6ff:fecf:7065 prefixlen 64 scopeid 0x20 inet6 2400:7800:47e0:1700:2c2:c6ff:fecf:7065 prefixlen 64 scopeid 0x0
ether 00:c2:c6:cf:70:65 txqueuelen 1000 (Ethernet)
RX packets 43 bytes 3646 (3.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 20 bytes 3042 (2.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@centos7 ~]#　接続できました。